MikroTik LtAP mini LTE Access Point Cellular kit

The MikroTik LtAP mini LTE kit is a small waterproof wireless access point with a built in cellular modem that supports 2G (international version only), 3G and 4G (LTE) connectivity. Connect to the LtAP mini’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device.

The LtAP mini LTE also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging. LtAP mini has a special enclosure with with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses or trains. External GPS antenna is available for ordering separately (not included, product code ACGPSA).

The LTE card is connected to two internal antennas with u.FL connectors, so if you want, you can unplug the connectors and add your own external LTE antenna for better coverage. The unit has several powering options: 9-30 V PoE-in by Ethernet port, DC jack and microUSB. Use the built in GPS module to track the location of your vehicle in real time, we have even provided a simple tracking application example in the RouterOS documentation, to help you start development of your platform.
Features
2.4 GHz AP in a rugged case
Two SIM slots
Built in LTE modem
Built in GPS
Serial port for other devices
Perfect for cars or outdoor mobile applications

Details
Product code RB912R-2nD-LTm
CPU QCA9531 650 MHz
Size of RAM 64 MB
Storage 16 MB
10/100 Ethernet ports 1
Wireless Built-in 2.4 GHz 802.11b/g/n, dual-chain
Wireless chip model QCA9531
Wireless regulations Specific frequency range can be limited by country regulations
Antenna beam width 360°
Wireless antenna gain 1.5 dBi
GPS Built-in MT3337V, with uUFL RF connector and active antenna support
PoE in Yes
SIM slot 2 Mini SIM slots
LTE modem Included
LTE category 4 (150Mbps Downlink, 50Mbps Uplink)
3G category R7 (21Mbps Downlinks, 5.76Mbps Uplink)
LTE antenna gain 3.5 dBi (with uFL connector)
Serial port RS232 (shared with GPS port)
Supported input voltage PoE in: 10 V - 57 V (Passive PoE and 802.3af/at with unshielded cable) DC jack: 8 - 30 V, MicroUSB: 5 V
Dimensions 139 x 77 x 28,5 mm
Operating temperature -40°C .. +70°C tested
License level 4
Operating System RouterOS
Max Power consumption 4 W

Resources

• Manufacturer Website
• RouterBOARD Website
• Firmware & Downloads
• FAQ's
• Wiki
• Forums

Details
Power Supply 24VDC 0.8A PSU
Power Injector RBPOE